MX50 SE 2x100W dual channels audio power amplifiers board kits new version is diy kits for your electronic project. This is the fifth edition of the MX50 that designed to improve the classic version with thousands of users.
Single-ended voltage amplifier stage, three-stage inverted darlington output, single differential input. Better control, resolving power and lower distortion.
Good quality noise, free amplification. Good choice for amplifier construction. Soldered easy, no any ajustments needs.
 |
| Diy Kit MX50 SE 2x100W Dual Channels Audio Power amplifiers Board Kits New Version |
In the MX50 SE 2x100W dual channels audio power amplifiers board kits includes : original copper foot metal film resistor, Kemet tdk monolithic capacitor, philips tube small production, the output stage using KTB817/KTD1047, and Japan electrolytic capacitor.
Key parameters :
- Voltage Gain GAIN: 34 times
- SNR: More than 98DB
- Voltage Gain GAIN: 34 times
- Output Power: 100W8R (+ - 42v)
- Distortion: < 0.009 THD 1KHZ 1OW
- Supply Voltage: + -15v to + -45v
- Frequency response = 20HZ-25KHZ -0.2DB
- Input Sensitivity: 1.2v 100w RMS 8 Europe
- Output Stage quiescent current per channel IQ Approximately 30MA
 |
| Diy Kit MX50 SE 2x100W Dual Channels Audio Power Amplifiers Circuit Schematic |
